Самосвал

WIELTON Strong Master 3-Achs Stahlmulde 26 cbm

Total length without chute 8801 mm
Total length with chute 8962 mm
Inner length 7410 mm
Total width 2550 mm
Inner width 2346 mm
Inner height 1515 mm
Track width 2040 mm
Distance: kingpin ? 2nd axle 4800 mm
Rear overhang without chute 1296 mm
Rear overhang with chute 1457 mm
Ground height 1464 mm
Max. height with tipped trough 8272 mm
Total weight 36 000 kg
Technical total weight 39 000 kg
Axle load 8 000 kg
Fifth wheel load 12 000 kg
Load volume 26 m3
Manufacturer designation for homologation NW-3 nd
Empty weight 6376 kg
The weight was specified with an accuracy of +/-3% ? nd
The manufacturer reserves the right to change the technical data of the vehicle

Chassis
Super Light chassis frame, straight, longitudinal member with recessed fifth wheel plate area
Welded construction, weight-optimized from high-strength S700 steel
Air suspension
Side impact protection made from aluminum profiles in accordance with ECE 73
2 plastic wheel chocks
Wheelbase 1310
Distance: kingpin ? 2nd axle: 4800mm
Underrun protection made of steel
Foldable underrun protection at the rear

Axles and suspension
1 200 mm fifth wheel height unloaded
Number of axles 3
Rigid axles
SAF disc axles 3x9000 kg 22.5 INTRADISC CD
1st lift axle

Support legs
SAF Hercules 2-speed gearbox supports, full load

Fenders
Full PVC fenders - 6 pieces
Rubber mud flaps with Wielton LOGO behind the third axle

Rims
6x steel rims 22.5-11.75 ET-120 protective caps for wheel nuts

Tires
6x tires 385-65-22.5 according to manufacturer's choice

Other chassis equipment
Aluminum ladder L=2 840 mm
Shovel and broom on the chassis, over the Fender
Toolbox - 44 L (mounted on front of chassis, left side)
Water tank ? 30 L (mounted on the chassis in the middle, left side)

Construction
Volume 26m3
Front wall inclined at 20 degrees
Suspension flap on top made of steel
Inner height 1515mm
Floor 4.5 mm, side walls 4.5 mm Hardox
Tension fasteners at the bottom - 2 pieces

Other construction equipment
Operating station on the chassis frame, access in FR on the left (driver's side)

Canopy
PVC roll-up tarpaulin 680 g/m2 with quick-release fastener and aluminum winding tube, (with vertical rear end with attachment triangle at the front and rear, center tube welded into the tarpaulin)
PVC roll-up tarpaulin

Brake system/pneumatics
Steel air tank
Spring pressure gauge
Automatic lowering when tipping
Wabco brake system 2S/2M

Chassis paintwork
Chassis paintwork RAL 7021 (black gray)

Paintwork Structure
All steel parts are blasted twice before painting
Structure painting RAL 7001 (silver gray)

Tarpaint color
Tarpaint color RAL 9006 (white aluminum)
E2Ptc9U

Hydraulics
HYVA hydraulic cylinder, eye mounting at the top
Hydraulic connection kit 1"

Electrics
Full LED lighting
LED reversing light - 1 piece
2x7-pin + 1x15-pin with EBS connection, without connection lines to the tractor unit
Full LED lighting Aspöck - ECOLED II with flashing side marker lights

Additional systems
Control line for lifting axle from the driver's cab
Pre-set brake
The system has been developed for semi-trailers and trailers and is used to monitor the tire pressure and tire temperature of the vehicle. Manufacturer ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS

Marking
Reflective warning signs
Partial contour marking with Wielton logo
Partial contour marking on the side in white
Partial contour marking on the rear in red
Wielton warning sticker

Warranty
24

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.