Другое

GOLDHOFER STZ-H6-57/80A Teleskop-Tieflader Waggontransport

Goldhofer STZ-H6-57/80A Telescopic low loader for wagon transport----
Technical approval 1
Speed: 80km/h 65km/h
Fifth wheel load: 23,000kg 26,000kg
Rear axle load: 10,000kg 11,000kg
Total weight: 83,000kg 92,000kg
Payload: 52,500kg 61,500kg
Tare weight: (without accessories): 30,500kg
---- Gooseneck:
Length: 4,000mm
Width: 2,480mm
Cxxjg2Wlch
Overall height: 235mm
Saddle height: 1,350mm
DLR front: 1,420mm
DLR rear: 2,700mm
Kingpin 3.5 inch
Bevel: beveled 10 degrees
Front corners: beveled 45 degrees
Floor covering: spruce 50mm
Seat posts: machanic
Width with drop sides: 2,550mm

Hydraulic STZ gooseneck with external beams, can be raised and lowered hydraulically
with machanic drop tube supports and hydraulic support cylinder
Hydromechanical forced steering (2-circuit steering) in flat design (overall height 235mm) with adjustable guide elements and THP steering cylinders.
---- Loading area:
Type: Platform
Liftable: no
Length: 13,000mm
Width: 3,000mm
Floor covering: Sheet metal/spruce 50mm
Wheel recesses: no
Widenings: no
Extendable: single telescopic
Length1: 10,000mm
Loading heights (loaded)
Loading height 1: 815mm

Loading platform telescopic, designed as outer and inner tube construction, with 1,070mm long, fixed loading platform section at the front.

Integrated pin/flap coupling in the fixed loading platform section for coupling tank bridge extension beams, the Vkt. rails welded on by us serve as a rail track in the track gauges 1,000mm (rail spacing 1,015mm) and 1,435mm (rail spacing 1,450mm).
Locking of the extension steps by spring-loaded cylinders and conical bushes
Loading surface height on the frame center tube (outer tube) approx. 815mm (+/- 130mm)
Loading platform height on the enclosed rail elements approx. 790mm (+/- 130mm)
---- Rear running gear:
Chassis type: Standard
Load height loaded: 815mm
Width: 3,000mm
Wheelbase: 1,360mm
Floor covering: Sheet metal
Widenings: no
Wheel recesses: no
Excavator trough: no
---- Axles:
Number of axles: 6
Lift axle: see accessories
Axle type: steering knuckle cranked
Axle compensation: hydraulic
Axle make: BPW/Eco
Driving positions: 1
Axle stroke (1) +/-: 130/130mm
Axle stroke (2) +/-: 0/0mm
Lifting/lowering valve: Yes
1st axle can be pneumatically raised with lift bellows
---- Steering:
Number of steering axles: 6
Steering axle arrangement: all steered
Steering angle max: 45° degrees
Steering type: Hydr. 2 circle ----Tires:
Dimension: 235/75 r 17.5 143/141 J
Tires. Type: Twin
Rim type: Disc
Rim center: Centered
----Bremse Code:
according to EU standard: Yes
AGS: Yes
ALB: Yes
ABS: Yes
with ABS del: No
Parking brake: Spring-applied
EBS: No
ECAS: No
Remark: Brake calculation no.: GH 4324S
----Suspension Remark:
Steering designed for the extended state with larger steering angle of the front axles
Open wheel cut-outs above the wheels with narrow crossbars in between (ALU covers see accessories below)
Operating elements protected on the left in the direction of travel
Rims 17.5x 6.75
Cranked axles!!!
---- Rear of vehicle:
Design: Standard 90°
Ramp attachment: see accessories
Floor covering: Sheet metal
Overhang from last axle: 1,300mm
Support: see accessories
----Load securing:
Lashing rings
Quantity: 5
loadable up to: 10 to per piece
Arrangement: 2 pairs on the SH
3 pairs on the LF---- rear extension:
max. load capacity 15,000 kg with a wagon bogie, made up of profiles, ohn

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.