Полуприцеп-самосвалSTAS
OP 10.60 52m³
Полуприцеп-самосвал
STAS
OP 10.60 52m³
Фиксированная цена без учета НДС
10 870 €
Состояние
Бывшее в употреблении
Местоположение
Korschenbroich-Glehn 

Показать изображения
Показать карту
Данные о машине
Цена и местонахождение
Фиксированная цена без учета НДС
10 870 €
- Местонахождение продавца:
- Dieselstr. 9, 41352 Korschenbroich-Glehn, Германия

Звонок
Технические детали
- Конфигурация осей:
- 3 оси
- Первая регистрация:
- 07/2000
- Длина грузового отсека:
- 10 600 мм
- Ширина пространства для загрузки:
- 2 480 мм
- Высота грузового отсека:
- 2 000 мм
- Объем грузового пространства:
- 52 м³
Детали предложения
- Код объявления:
- A20722547
- Последнее обновление:
- в 10.12.2025
Описание
TÜV new!
Chassis
In aluminium
Two fully automatic welded I-beams with welded cross members.
Chassis width 1,200 mm
Axles and suspension drum brakes
BPW/SAF axle units 3 x 9 t with air suspension, air bellows centrally arranged on the chassis longitudinal member, lift axle with starting aid, load pressure gauge, raising-lowering valve,
Tires and wheels
6 wheels with tires size 385/65 R 22.5 approx. 30-50%? 11.75 & 22.5 ET 0, on aluminum rims
King pin
2" - screwed into a 10 mm thick plate
Dodpfex Ep Nxsx Aggswf
Landing gear
Mechanical version with one-sided operation in 2 speeds,
for air suspension we use Jost Module,
Brake system
According to E.G. standard, two-line system Wabco, spring-loaded parking brake on two axles and EBS-D system Wabco, ALU air tank
electrical system
According to the guidelines of the STVZO with 2 five-chamber lamps type Aspöck, 24 volt system with a second socket for special operation, taillights in LED design, 3x separate reversing lights
Tipper body / trough
Aluminum trough, side walls 30mm thick plank profiles (2-3 mm) fully welded, floor approx. 8 mm thick wear-resistant alloy? Front wall 4 mm reinforced in straight design, rear wall pendulum flap with LL seal in slanted design with a central grain slider, pendulum flap with pneumatic operation, doors covered at the top, fold-down sideboards left and removable extension sideboard at the back,
Hydraulic system tipping cylinder is new
Hydraulic cylinder mounted on the front wall with a working pressure of 135 bar, make Edbro 18 with approx. 2 m hose and loose half 1",
Accessories
6 PVC mudguards, spare wheel holder, side underrun protection, toolbox, 3 m aluminum ladder, aluminum swing roof with rolling tarp system and catwalk on the trough? Tarpaulin closure
sideways with tension belts, 2 aluminium swing bows, foldable underrun protection in aluminium, separate discharge funnel with tarpaulin bag attached to the side of the frame, holder for shovel, broom and
scraper, etc...
Offer and pictures are non-binding.
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
Chassis
In aluminium
Two fully automatic welded I-beams with welded cross members.
Chassis width 1,200 mm
Axles and suspension drum brakes
BPW/SAF axle units 3 x 9 t with air suspension, air bellows centrally arranged on the chassis longitudinal member, lift axle with starting aid, load pressure gauge, raising-lowering valve,
Tires and wheels
6 wheels with tires size 385/65 R 22.5 approx. 30-50%? 11.75 & 22.5 ET 0, on aluminum rims
King pin
2" - screwed into a 10 mm thick plate
Dodpfex Ep Nxsx Aggswf
Landing gear
Mechanical version with one-sided operation in 2 speeds,
for air suspension we use Jost Module,
Brake system
According to E.G. standard, two-line system Wabco, spring-loaded parking brake on two axles and EBS-D system Wabco, ALU air tank
electrical system
According to the guidelines of the STVZO with 2 five-chamber lamps type Aspöck, 24 volt system with a second socket for special operation, taillights in LED design, 3x separate reversing lights
Tipper body / trough
Aluminum trough, side walls 30mm thick plank profiles (2-3 mm) fully welded, floor approx. 8 mm thick wear-resistant alloy? Front wall 4 mm reinforced in straight design, rear wall pendulum flap with LL seal in slanted design with a central grain slider, pendulum flap with pneumatic operation, doors covered at the top, fold-down sideboards left and removable extension sideboard at the back,
Hydraulic system tipping cylinder is new
Hydraulic cylinder mounted on the front wall with a working pressure of 135 bar, make Edbro 18 with approx. 2 m hose and loose half 1",
Accessories
6 PVC mudguards, spare wheel holder, side underrun protection, toolbox, 3 m aluminum ladder, aluminum swing roof with rolling tarp system and catwalk on the trough? Tarpaulin closure
sideways with tension belts, 2 aluminium swing bows, foldable underrun protection in aluminium, separate discharge funnel with tarpaulin bag attached to the side of the frame, holder for shovel, broom and
scraper, etc...
Offer and pictures are non-binding.
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2002
Отправить заявку
Телефон & Факс
+49 2182 ... объявления
Ваше объявление было успешно удалено
Произошла ошибка




















