Самосвал

STAS AgroStar 48,8 cbm

AGROSTAR - V100 - VERTICAL BULKHEAD - VERTICAL REAR DOOR
Interior length body: 10464 MM
Interior width body: 2460 MM
Interior height body: 1900 MM
Body volume: 48.8 cbm
GVW: 36 T
Center distance: 1310 MM
Saddle height: 1150-1230 MM

AXLE
Tridem: Make: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 T Suspension: Original air suspension SAF Brakes: large disc - INTEGRAL Brake wear indicator: with With tire inflation system and axle preparation. Duo Matic brake connection
LIFT AXLE FUNCTION
The first and third axles are automatic lift axles. (automatic lifting when empty, automatic lowering when loaded). The lift axles are controlled via the EBS-E system. Both axles lift separately.
EXTRA PNEUMATIC CONTROLS
Automatic lowering of the air suspension during tipping. The door locking hooks are opened automatically during tipping (can be locked by means of a tap on the frame).
AIR SUSPENSION
Lifting and lowering device. Aluminum air reservoir.
Tires
6 x 385/65 R 22.5 tires on ALCOA DURA BRIGHT aluminium rims. ET 120
SADDLE SUPPORTS
Aluminum dropper posts, type STAS. Each side is to be used individually. The truck should be equipped with air suspension.
BRAKE SYSTEM
- EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-line air brake system according to CE guidelines. Spring-applied parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). Duo Matic brake connection
LIGHTING
- ASPÖCK 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin sockets ISO connection. Aspöck set. Side : orange LED lighting. Rear : 2 x 3 round LED lights - 1 x round LED rear fog light, center mounted - 2 x LED reversing lights. Rear and front outline marker lights : LED lighting
UNDERRIDE GUARD
Folding underride guard (manual)
HYDRAULIC RAM
Hydraulic ram with large casing, make HYVA (model FC 169). Low pressure.
ACCESSORIES
3 holders for broom, bucket and scraper Aluminum ladder (3m), mounted on the right. Side collision protection. 2 x PVC toolbox with key (830x470x480mm)


MULDE rectangular aluminum tipper body. Side walls in smooth design.
Dpbh8T
STAND WALL Straight front wall in 4 mm thick aluminum sheet. The end wall is reinforced for cylinder attachment.
STEPS ON THE SIDE WALL (INSIDE) With steps on the inside of the tipper body.
SIDE WALLS with smooth finish inside and outside. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded on the inside. Top chord 90 mm wide. Side walls and floor are connected by means of a right-angled profile (90°) so that the entire floor width can be used.
WEAR PLATE Wear plate in aluminum, rectangular, on the inside at the rear, 3000 x 1000 x 4 mm.
FLOOR 8 mm thick floor plate - 100 mm high cross beams. The cross members are installed closely offset as a one-piece profile across the entire width of the tipper body.
REAR DOOR Rear door made of 4 mm aluminum sheet and reinforcement profiles. Universal door WITHOUT crossbar. Two wings, equipped with an attached lock. Hinges on nylon bearings. With 2 grain sliders. With rubber seal. Smooth rear door
Combination door with double door hinge
Electric sliding roof Cramaro

All information without guarantee. Errors excepted - prior sale possible.

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.