Низкий погрузчик

NOOTEBOOM OSDS-Semi-Tieflader

Saddle height: 1200-1250 mm
Gooseneck cross-section: 185 mm
Gooseneck length: 3800 mm
Front overhang: 1200 mm
Front radius: 1560 mm
Free turning radius under gooseneck: 2350 mm
Gooseneck bevel: 750 mm x 14°
Width of gooseneck: 2520 mm

Loading area
Cdmqalcsyo
Loaded ride height (-/+ lift): 860 mm -70/+130 mm
Step to gooseneck: 550 mm
Loading area length (retracted / extended): 9250 mm
Loading area slope: 1150 mm x 5°
Loading area width: 2520 mm
Loading area widening up to max: 3020 mm

Axle spacing
Kingpin ? first axle (pushed in / pulled out): 7190 mm
Rear wheelbase: 1360 mm
Rear overhang: 2340 mm
Kingpin ? Rear (retracted / extended): 12250 mm

Drive-on ramps
Drive-on angle: 4000 mm x 11°
Height in driving position: 3265 mm
Width over ramps pushed together: 1770 mm
Width over ramps extended: 2990 mm
Ramp width: 880 mm

Power supply
- Connections for brakes, lighting and EBS centrally on front console.
- NATO connection cable in helical flex design (spiral cable).
- NATO socket body kit for tractor unit is not included in the scope of delivery.

Front wall / front box
- Lockable steel tool box at the front on the gooseneck, divided into three compartments, with side doors and stainless steel lid at the top. Color silver-grey RAL 9006. SUITABLE FOR INSTALLATION OF A WINCH.

Gooseneck options
- Spare wheel holder mounted on the front.
- A lashing eye on the back of the gooseneck for hooking in the steel cable.
- 3 aluminum plug-in boards on the gooseneck, height 400mm, all three approx. 2.3m long.

Loading area
- The loading area is slanted at 1150x100m (5°).
- Tubular central frame with practical cross members. This makes the semi-trailer very torsion-resistant and therefore very laterally stable when loaded.
- Where necessary, the cross members are reinforced to ensure safe passage of machinery.
- 6/8 mm tear plate over the axles.
- Cross member recessed 4cm.
- Cross members recessed 4 cm in bevel.
- Loading area reinforced above the tires for road milling up to max Wirtgen 1000DC.
- Extendable widening brackets every approx. 1.40m to widen the loading area by 250mm per side.

Brakes
- 2-line Wabco EBS brake system, with automatic load-dependent brake force control (ALB), anti-lock braking system (ABS), and roll-over stability support (RSS).
- Parking brake by spring cylinders on several axles.
- ISO couplings for connecting the brakes
- A Duomatic connection is fitted parallel to the ISO air connections.

Lighting
- Wiring is based on Hella EasyCon and complies with insulation standard IP69, suitable for ADR.
- 2 7-pin sockets (ISO-N and ISO-S) on front console.
- White/red marker lights, orange side lights and number plate lighting in LED design.
- Rectangular LED rear lights. (According to the EU directive, the truck must be able to monitor the (LED) direction indicators of the trailer).
- 1 complete all-round light connection at the rear.
- Preparation for warning signs on the gooseneck and axle frame, consisting of brackets and sockets.
- 4 adjustable red/white warning signs with protected LED position lights.
- All-round light connections on the warning signs.
- Pair of additional holders for mounting warning signs in the existing stanchion pockets on the top of the cargo bed.
- All-round light in LED version. (10W - 24V/0.4A - 12V/0.8A)
- Additional 2-pole socket mounted on the left ramp.
- Additional

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.