Шагающий пол

KNAPEN 3-Achs-Schubbodenauflieger 92m³

Extract from the equipment. Complete equipment on request.

Extract from the equipment
* Kingpin - Kingpin 2 inch mounted on an approx. 10 mm thick saddle plate St 52-3
* Fifth-wheel plates for max. fifth-wheel pressure 15,000 kg ACHSEN
* 3 x 9 t BPW Eco Air HD axles, rigid, with disc brakes approx. 430 mm, 10 bolts ET-120
* 1st axle as lift axle, fully automatic via EBS
* incl. starting aid (3x brakes)
* Radio remote control

TIRES AND RIMS
* 6 steel rims with standard color finish
* 6 tires 385/65 R22.5
* Manufacturer's choice of tires

ADDITIONAL PARTS
* Steel support legs with tiltable base
* Maximum drawbar load: 50 tons
* Maximum lifting load: 24 tons
* Plastic toolbox with hinge at the bottom, dimensions approx. 1,000 x 500 x 500 mm. Position: left behind the axles
* Aluminum side collision protection in open design, foldable according to EEC regulations

FLOOR
* CARGOFLOOR - CF 500 SL-C system
* The CARGOFLOOR system is equipped with an E-Control
* Smooth aluminum floor boards, approx. 10 mm, 21 boards
* The floor boards are fitted with aluminum end caps
* A stainless steel plate on the back below the floor for additional wear protection

FRONT WALL CONSTRUCTION
* The largest platform on the market is mounted on the front wall
* 2 ladders on the front wall, position: left and right
* A door is mounted in the bulkhead to allow easy access to the front of the trailer
* Position: left turning outwards
* MOVING PARTITION WALL
* For complete emptying, the trailer is equipped with a moving partition wall made of aluminum
* A brush to prevent soiling of the running rails
* Ground clearance approx. 100 mm SIDE WALLS
* Extra strong top edge profile with rails for the moving partition wall
* Top edge profile with notch for securing the roller tarpaulin with a piping groove
* The side walls consist of an approx. 3 mm inner side and an approx. 2 mm outer side
* The side walls are continuously welded over the entire height (inside) for maximum strength and minimum soiling
* Welding is carried out using a high-quality and fully automatic welding process
* Incl. side protection cover left side BACK SIDE
* The rear doors are fully welded from wall and frame profiles for extra strength
* The doors are equipped with a pneumatic safety lock for safety when unloading
* Loading height with closed upper belt at the rear approx. 2,665 mm
* Individual stainless steel locking bar per rear door, in heavy-duty version OBERGURT
* Steel upper belt, with wedge BARS
* 4 round bows, with a diameter of approx. 60.3 mm, position: 1 & 3 & 5 & 7
* The bows are divided into 3 compartments of approx. 4,100 mm each ROOF COVERING
* Extra strong roller tarpaulin of approx. 900 gr/m2
* Four tension belts are used to secure the roller tarpaulin
* Tarpaulin overhang on the left approx. 400 mm
* 4 folding tarpaulin supports

Dppzvx
LIGHTING
* 2 x 7-chamber Europoint 3 rear lights
* 2 white LED lights on the front wall
* 4 pairs of orange LED side marker lights under the side wall
* 1 pair of red/white/orange LED lane departure warning lights mounted at the side of the rear
* 2 reflective strips, side white, rear red. According to European regulations
* Length of marking plates according to European regulations
* 2 LED work lights switched at the support legs, by radio remote control
* 2 LED work lights

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.