Другие

Fliegl ZPS 200

Further information
Fine-grained steel welded construction
Container locking system:
- 2 pairs of locking hooks embedded in the floor
- Pneumatic actuation
The container locking mechanism is a 2-point design that acts from the inside and locking of roll-off containers with an inner web is not possible (for transporting roll-off containers with a base frame in accordance with DIN 30722) Note! At the start of the roller recess at the front, the container must be pushed on completely flat! Longitudinal guide rails can be moved sideways and removed, rails approx. 115 mm high, 2 pairs of adjustable and removable skip locking wedges, 1 pair in front of each container, turntable with strong ball bearing slewing ring
8 pairs of lashing mushrooms recessed into the top and sides of the outer frame, 5 tons each, 7 pairs of stake pockets recessed into the outer frame, inside 70 x 40 mm, 2 wheel chocks with holder, aluminium side bumpers, steel underride guard, quarter-shell mudguards, 1 spare wheel holder for 1 e-wheel, 1 plastic toolbox, container lock, 1 pair of locking cut-outs embedded in the floor at the rear for 1 x 20 foot container, without container locking adapter (additional cross support required at the front and rear of the container, the container must rest evenly across the width in conjunction with the locks, cross supports are not included in the scope of delivery)

Drawbar with tested 40 mm drawbar eye, lowerable drawbar with pneumatic lowering & lifting support, in Y-shape

SAF drum brake axles, axle/chassis laser-measured Reduction in tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings

2-line compressed air brake system, spring-loaded parking brake, 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!

24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front
2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 additional LED work light(s) at the rear, switched via reversing light

Steel floor, roller recess for container recessed in the floor at the frontfor roll-off containers from 5,000 - 7,000 mm long, Note: Slight floor undulation possible due to welding distortion!
Cwzdfqjxyx

Lockable storage space for access ramps underneath the loading area

Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV)
24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips to ECE R 048, white at the sides and red at the rear

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.