Другое

FAYMONVILLE Prefamax Innenlader 3 x LASI

Extract from the equipment. Complete equipment on request.

Extract from the equipment
Gooseneck
* Gooseneck designed as a loading platform with aluminum tear plate covering, with front bevel approx. 45°
* Hydraulic lifting arm can be raised and lowered by approx. -280/+250 mm
* Two kingpin positions at approx. 2,300 mm and approx. 2,000 mm For SZM: 4 x 2, 6 x 2 or 6 x 4

Loading chute
* Length approx. 9,500 mm, with angle profiles attached at the bottom to accommodate the loading pallets (distance between kingpin and center of axle unit approx. 8,000 mm)

Axles and suspension
* BPW stub axles, with drum brakes and independent suspension
* Hydraulic axle compensation with lifting and lowering device
* Anti-lowering device on the axles in the event of suspension hose bursting, designed for a maximum pallet height of 150 mm

Tires
* Prefa: 385/65 R 22.5 (M+S) - make of our choice

Brake system
* EBS brake system of the WABCO brand in accordance with EU regulations. WITHOUT connecting cable to the tractor unit

Paint finish
* 6-K final treatment
* Complete steel construction shot-blasted after welding
* 1 layer of zinc-based primer, 1 layer of adhesive primer
* Final coating with 2 layers of 2-component paint (acrylic) in one color, followed by sealing of the cavities with special wax
* Trailer color: RAL 3002 carmine red
* Color of the rims: Silver gray
* Color of the wheel hubs: black
Segwfwuwkl

Steel construction
* Made from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welder DIN-EN 287-1 tested. Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175

Accessories included
* 2 inch kingpin
* 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN)
* ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin 24N connection in accordance with ISO-1185 24S connection in accordance with ISO-3731 15-pin connection in accordance with ISO-12098
* Lighting for operating the gooseneck, suspension and hydraulic tensioning with on/off switch
* Mechanical downpipe supports for approx. 48,000 kg support load
* 4 restraining shoes with bracket on the vehicle
* Access ladder mounted at the front left, with 2 plug-in retaining brackets. The ladder can optionally be mounted by the customer on the right-hand side in the direction of travel
* A removable full cladding on both sides in front of the axle unit
* The first and last axle on the left and right can be lifted manually
* Operation of all work lights in the gooseneck area via on/off switch on the gooseneck (operation of the work lights from the SZM is not possible in this case)
* WABCO Roll Stablity Support (RSS)
* 9 pairs of lashing rings on the side members (LC 6,300 daN)
* A grating support at the same height on the side members between the guide rails of the load securing devices
* Behind the axle unit on the left and right a stowage box, splash-proof
* Bevel at the rear for easier insertion of the load pallet
* Eyelets attached to the rear of the end cross member for mechanical tensioning
* Rear door with cross bracing, mounted on the left and hydraulically locked on the right, can be locked horizontally at approx. 90°, 105° and 270
* Underride guard can be folded upwards for transporting a maximum of 4 empty standard pallets Without width adjustment
* 1 spare wheel holder on the right in the direction of travel. WITHOUT spare wheel
* License plate with holder inc

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.