Низкий погрузчик

FAYMONVILLE Multimax PA-X Satteltieflader - hydr. gelenkt

Extract from the equipment. Complete equipment on request.

GOOSENECK
* in SNT design to optimize the loading area length
* Length approx. 3,750 mm, with beveled corners at the front approx. 400 x 400 mm and beveled at the rear approx. 850 mm x 10°
* Can be raised and lowered hydraulically, stroke +- 250 mm
* Incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles
* Steel front wall, pluggable, approx. 400 mm high
* Checkered plate covering above the gooseneck
* Aluminum side walls pluggable on the gooseneck, approx. 400 mm high, in anodized design
* 3.5 inch kingpin
* 4 pairs of additional screwable lashing rings (LC 5,000 daN)
* 1 INOX tool box, one-piece, approx. 2,480 x 340 x 390 mm (L x W x H), outside in a beveled design approx. 45°, with 2 side doors on the outside and 1 cover on top, behind the front wall on the gooseneck

LOADING AREA
* in extendable design, length approx. 11,000 mm, with bevel at the rear approx. 500 mm x 10°
* A recess in the loading area and in the bevel protruding to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm (L x W x H)

PA-X axle system
* all axles hydro-mechanically forced steered

Tires
* 245/70 R 17.5 3PMSF load index 143/141L(146/146F)
Crkitatb

Loading area
* Continuous sheet metal covering on the loading area with a painted layer of sand as anti-slip protection
* 1 intermediate table, approx. 500 mm wide, for the extension, with long holes for hanging and movable bridging elements
* Painted sand coating on the support surfaces of the intermediate table
* Mechanical locking for locking the intermediate table on the extension
* Locking of the loading area with conical welded locking profiles on the first approx. 3,000 mm extension every approx. 125 mm, then every approx. 500 mm
* Long holes for hanging and movable bridging elements on the fixed part behind the gooseneck on the front of the loading area
* 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN)
* 3 pairs of hanging lashing rings (LC 10,000 daN) inside the dipperstick recess
* 8 pairs of stake pockets embedded in the outer frame of the loading area, for plug-in stakes approx. 100 x 50 mm extensions (galvanized) extendable by approx. 230 mm per side (without wooden planks)
* Control valves for the hydraulic ramps on the right side of the vehicle
* Square climbing rails approx. 15 x 30 mm on sheet metal covering, every approx. 150 mm on the slope of the loading area
* 1 pair of mechanical rear supports
* A 7-pin socket on the end crossbar
* Central lubrication system with 2 pumps, brand BEKAMAX, with normal grease according to NLGI-2, removable protection around the central lubrication pumps
* Steering can be operated from the front and rear using a cable remote control, with alignment control of the axles, without installation in the tractor unit
* 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches, without installation of the supply connections on the tractor unit
* Widening planks, loose, in reinforced steel U-frame
* Screwable container locks for PA-X loading areas, suitable for 1 x 20', 1 x 30', 1 x 40' or 1 x 45' container
* Including 4 Wader container locks and M42 + M30 fastening screws
* 1 LED rotating beacon on the left and right at the rear of the vehicle
* One LED reversing light on the left and right at the rear of the vehicle
* Round NATO socket on the fron

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.