Низкий погрузчик

FAYMONVILLE Multi-NZ-4(1+3)L-AU-18AT-9.20-17.5-2.54-FR

Technical data Multi-NZ-4(1+3)L-AU-18AT-9.20-17.5-2.54-FR
Speed : 80 km/h
Total weight : 73000 kg
fifth wheel load : 25000 kg
Axle load : 48000 kg
Gooseneck length approx.: 3 700 mm
Gooseneck width approx.: 2 480 mm
Rear steering radius kingpin approx.: 2 300 mm
Semi-mounted height loaded approx.: 1250 mm
Loading area length approx.: 9 200 mm
Extendable by approx.: 6 900 mm
Loading area width approx.: 2 540 mm
Center distance: 3 245 mm/2x 1 510 mm
mm
Spring travel approx.: -55/+145 mm
Loading height with max. load approx.: 860 mm

*Total weight depends on the fifth wheel load:
Special approval required Oui
when exceeding the
country-specific legislation :
Technical description
Gooseneck Gooseneck in SNT design to optimize the length of the loading area
length, length approx. 3,700 mm, front with beveled corners approx.
corners approx. 400 x 400 mm and rear with chamfer approx. 1,000
mm x 10°.
Technical fifth-wheel load: 25,000 kg.
Bgpllgvv
For SZM: 4 x 2, 6 x 2 and 6 x 4.
Loading platform: Loading platform in extendable design, length approx. 9,200 mm with
bevel at the rear approx. 500 mm x 10°.
Pneumatic locking system with conical locking bolt
and reinforced locking positions, the supply lines are protected
are protected in the extendable supports and adapt automatically to the
automatically adapt to the respective loading area length.
Ramps: DR-15/60-900 mm-4350-HB-HV
A pair of two-part steel ramps with a length of approx. 4,350
mm and a width of approx. 900 mm.
Hardwood decking.
Hydraulically folding ramp tips.
Ramps can be moved outwards by approx. 235 mm and inwards by approx.
365 mm inwards.
Maximum load and ramp angle according to technical data sheet
data sheet: C465168
In accordance with Regulation 1230/2012/EU, the ramps must be
ramps with a length of less than 300 mm in the driving position must not be
be included in the vehicle length of 16 500 mm.
Axles and suspension: BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically
all other axles with forced hydro-mechanical steering.
1st axle with electro-magnetic reverse lock via reverse gear and
reverse gear and can be activated manually.
Technical axle load: 12,000 kg
Air suspension with lifting and lowering valve.
Axle tool.
Tires: GOODYEAR KMAX T 3PMSF
245/70 R17.5 dual tires
Load index 143/141J (146/146F)
Brake system: WABCO EBS-E brake system in accordance with
EU regulations.
Without connecting cable to the tractor unit.

Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED"
Version in accordance with EU regulations.
(ASS 3)
Full metallization: Complete HRM metallization (High Resistance Metallization)
Complete steel construction shot-peened, then coated with ZINACOR
850 (zinc 85% - aluminum 15%).
Painting 6-K final treatment:
Complete steel construction shot-peened after welding.
1 coat of zinc-based primer, 1 coat of adhesion primer.
Final coating with 2 coats of 2-component paint (acrylic) in a single color in
RAL colors of your choice, then sealing the cavities with special wax.
with special wax.
Rims in silver.
Multicolor and special paintwork at an extra charge.
Steel construction: Steel construction made of high-strength fine-grained steels.
Steel grades:
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)
Welder DIN-EN 287-1 tested.
MAG welding process according to EN ISO 4063.
Shielding gas M21 according to EN ISO 14175
i Front wall made of steel, pluggable, approx. 400 mm high
Connection strip for sup

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.