Рабочая платформа

FAYMONVILLE MAX Trailer MAX200 Telesattel Rungen

Extract from the equipment. Complete equipment on request.

Extract from equipment
Loading surface
* Extendable version with pneumatically operated locking mechanism
* 7 pairs of lashing rings can be folded outwards (LC 5 000 daN)
* 3 pairs of lashing rings can be folded outwards (LC 10 000 daN)
* Cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN)

Seat posts
* JOST fifth-wheel supports (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load)

BPW axles
* Air-sprung, with disc brakes (approx. 430 mm), with lifting/lowering function
* Technical axle load: 10,000 kg each (ET0)
* Self-steering axle with electromagnetic reverse lock to be activated via reverse gear or manually

Tires
* 385/65 R 22.5

Brake system
* in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit

Steel construction
* made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)

Coating
* First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer
* A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red
* Rims in silver
* Rear part metallized and painted in RAL 9010 (pure white)

Incl. the following additional equipment
* Yellow-red air couplings on the galvanized connection strip at the front
* 4 brake shoes with bracket. (± 5kg)
* 2 inch kingpin
* Yellow reflective tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer
* European reflector plates (red-yellow) at the rear of the trailer
* Loading area with approx. 30 mm thick wooden floor edged in omega profiles
* 10 pairs of stake pockets for stanchions approx. 100 x 50 mm in the outer frame of the cargo bed (± 30 kg)
* Storage for max. 9 pairs of stanchions approx. 100 x 50 mm bolted to the inside of the front wall (± 34 kg)
* 1 spare wheel holder under the cargo bed on the left in the direction of travel, without spare wheel
* One mud flap at the rear of the trailer.
* Manual and description on USB stick.
Cv3Wm7Qcz8
* One bracket for a rotating beacon at the rear of the trailer
* One bracket for the warning signs on the gooseneck and on the rear panel on the left and right, including a socket
* Speed sticker 80 km/h at the rear and on both sides
* Load manometer for determining the axle loads including load diagram
* One galvanized steel bulkhead (EN12642-XL), approx. 1,600 mm high (± 35 kg)
* 6 pairs of WADER container pockets in the loading area, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear (± 90kg)
* One INOX toolbox, approx. 600x350x600 mm, under the loading area on the left in the direction of travel (± 36kg)
* 4 pairs of stanchion pocket rails mounted in the longitudinal direction of the cargo bed, for 80 x 50 mm stanchions. (± 145kg)
* Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading condition (± 69kg)
* 2 LED reversing lights mounted on the rear panel
* HRM metallization (High Resistance Metallization)

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.