Рабочая платформа

FAYMONVILLE MAX Trailer MAX200 Telesattel Bordwände

Extract from the equipment. Complete equipment on request.

Loading area
* Loading area in extendable design with pneumatically operated locking
* Loading area with approx. 30 mm thick wooden floor framed in omega profiles
* 10 pairs of lashing rings, foldable (LC 2 500 daN)
* 7 pairs of lashing rings, foldable outwards (LC 5 000 daN)
* 3 pairs of lashing rings, foldable outwards (LC 10 000 daN)
* Loading area width of approx. 2,480 mm

Seat supports
* JOST seat supports (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load)

Axles
* BPW axles, air-sprung, with disc brakes (approx. 430 mm), with lifting/lowering function (ET 120)
* Self-steering axle with electro-magnetic reversing lock via Reverse gear or manually activated
* Axle tool

Tires
* Tires 385/65 R 22.5

Brake system
* Brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit

Paintwork
* First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
* A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red
Bozsckfq
* Rear section metallized and painted in RAL 9010 (pure white)

Incl. the following additional equipment
* Yellow-red air couplings on the galvanized connection strip at the front
* 2 inch kingpin
* Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer
* European reflector signs (red-yellow) on the rear of the trailer
* Loading area with approx. 30 mm thick wooden floor framed in omega profiles
* Storage for approx. 1,000 mm long plug-in stanchions in the central support at the rear
* 1 spare wheel holder under the loading area on the left in the direction of travel
* A bracket for a rotating beacon at the rear of the trailer
* A bracket for the warning signs on the gooseneck and on the rear panel on the left and right, including a socket
* Load gauge for determining the axle loads, including load diagram
* A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
* Foldable aluminum side walls with wing doors at the rear (anodized), on the side of the loading area, approx. 600 mm high, with KINNEGRIP folding stanchions
* Bracket for aluminum side walls, under the loading area in front of the axles
* Bracket for KINNEGRIP stanchions, under the loading area behind the axles
* 10 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area
* Ram protection on the right and left of the rear cross member
* 6 pairs of WADER container pockets in the loading area, for 1x 20' container, 2x 20' container or 1x 40' container
* A tool box made of stainless steel, approx. 600 x 350 x 600 mm, under the loading area on the left in the direction of travel
* 4 pairs of stake pocket strips mounted lengthways on the loading area, for 100 x 50 mm stakes
* Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading status
* A bracket for a rotating beacon on the warning signs
* An acoustic warning signal when reversing
* 2 LED reversing lights mounted on the rear panel
* HRM metallization (High Resistance Metallization) of the outer frame

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.