Низкий погрузчик

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Radmulden

Extract from the equipment. Complete equipment on request.

Extract from equipment
Gooseneck
* with chamfered corners at the front approx. 45° and with rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5 000 daN) Hardwood decking approx. 30 mm thick

Ramps
* One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood decking Ramp with hydraulic lifting gear, hydraulically movable
* Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position do not have to be included in the vehicle length

Loading area
* Telescopic loading area with rear chamfer approx. 1,000 mm x 8° 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (LXWxD) Wheel recesses with square climbing strips approx. 15 x 15 mm and widenings in the lower area.
* A pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm (L x W x D)
* Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) max. point load 5 t/unit
* Recess in the chamfer and protruding into the loading area to accommodate the excavator dipper stick (approx. 2,900 x 750 x 210/290 mm ( L x W x H)
* 1 pair of lashing rings lying in the front of the loading area (LC 10 000 daN) 5 pairs of lashing rings foldable outwards (LC 5 000 daN) 2 pairs of lashing rings foldable outwards (LC 10 000 daN)
* 2 pairs of lashing rings in the excavator trough (LC 5 000 daN)
* Cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2000 daN)

Saddle supports
* JOST (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load)

Axles
Dpq2Sd
* BPW axles and suspension, 2 axles rigid, 1 axle self-steering
* Technical axle load: 12,000 kg each Electromagnetic reverse lock via reverse gear and manual activation

Air suspension
* With lifting and lowering valve

Tires
* 235/75 R 17.5 3PMSF

Brake system
* WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit

Steel construction
* made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)

Electrical system
* In accordance with EU regulations
* 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX lighting on the front connection strip with 24N, 24S & 15-pin sockets
* Connection according to ISO. 24N ISO-1185 24S ISO-3731 15 pole ISO-12098

Paintwork
* First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red
* Rear part metallized and painted in RAL 9010 (pure white)
* No metallic paint finish possible

Incl. the following additional equipment
* 2 inch kingpin
* One galvanized steel bulkhead, approx. 400 mm high
* One spare wheel holder in front of the bulkhead Yellow-red air couplings on the galvanized connection strip at the front
* 4 brake shoes with holder on the bulkhead (± 5 kg)
* Mounting in the rear area of the gooseneck for aluminum docking lights
* Galvanized folding supports under the bevel of the cargo bed
* One bracket for a rotating beacon at the rear of the trailer Cover plates for bridging the gap between the ramps and the cargo bed (±17kg)
* 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
* Yellow re

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.